CYP SDV-FTX handleiding
Handleiding
Je bekijkt pagina 10 van 24
10
6.2 Transmitter's Rear Panel
DC 12V
LAN USB
RS232
AUDIO IR OUT IR IN
DP IN
HDMI IN SFP+
21 3 8
4
5
6 7
9 10
1
DP IN: Connect to DisplayPort source equipment such as a PC or
laptop.
2
HDMI IN: Connect to HDMI source equipment such as a media player,
game console or set-top box.
3
SFP+: Connect a standard SFP+ module to allow data transmission
over optical fiber to a compatible Receiver.
Note: Single-mode and multi-mode support is dependent on the SFP+
modules used. Simplex SFP+ modules must use different wavelengths for
each end (e.g. 1330/1270nm).
4
AUDIO IN: Connect to the stereo analogue output of a device such as
a CD player or PC.
5
IR OUT: Connect to the provided IR Blaster to transmit IR signals to
devices within direct line-of-sight of the IR Blaster.
6
IR IN: Connect to the provided IR Extender to extend the IR control
range of remotely located devices. Ensure that the remote being used
is within direct line-of-sight of the IR Extender.
7
RS232: Reserved for future use.
8
LAN: Connect to an Ethernet supporting device or to your local
network as appropriate to extend the network between the
Transmitter and Receiver.
9
USB: Connect directly to a PC to extend its USB functionality to the
port on the connected Receiver.
10
DC 12V: Plug the 12V DC power adapter into this port and connect it
to an AC wall outlet for power.
Bekijk gratis de handleiding van CYP SDV-FTX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | SDV-FTX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1660 MB |
