CYP SDV-FTRX-U handleiding
Handleiding
Je bekijkt pagina 18 van 32
13
3) USB Control Mode: Enable or disable the USB 2.0 (Mini B) port for
connection to USB host devices such as a PC or laptop. Selecting
Device mode enables the USB 2.0 (Mini B) port. Selecting Host mode
disables the USB 2.0 (Mini B) port.
Note: The default setting in Transmitter Mode is Device. The default setting
in Receiver Mode is Host. In a Point-to-Point extension configuration, only
one transceiver should be set as a USB Device at a time.
4) USB Virtual Hub: Enables or disables the simultaneous connection
USB mode which allows the PC/Laptop connected to this unit to be
paired with the USB devices on up to 7 “Host Mode” transceivers.
Note: Only available when the USB Control Mode is set to Device.
5) Input: Select current input source. Input 1 is the local HDMI input,
Input 2 is the DisplayPort input, and Input 3 is the optical fiber
streaming video input.
Note: Input 3 (streaming) is only available in Receiver Mode.
6) Auto Mode: Enable or disable the auto switch mode. When enabled,
the unit will automatically switch inputs when a new source is
detected.
INFORMATION
2ND LEVEL 3RD LEVEL
Resolution
[Show the current
status of each item]
Status
FW Version
IP
LAN MAC
USB MAC
SN
Fan Status
1) Information: Shows details of the unit’s current status including
detected input resolution, transceiver mode, firmware version, IP
address, MAC address, serial number and fan state.
Bekijk gratis de handleiding van CYP SDV-FTRX-U, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | SDV-FTRX-U |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2461 MB |
