CYP SDV-CTRX-BD handleiding
Handleiding
Je bekijkt pagina 10 van 36
5
USB LED: This LED will illuminate when the unit’s USB ports have
successfully paired with the USB ports on another unit. This LED will
blink if the unit’s USB ports are not currently paired and in stand-by
mode.
6
MENU Button: Press to enter the OSD menu, or to back out from
menu items.
7
− (MINUS) Button: Press to move up or adjust selections within OSD
menus. When not in a menu, press to manually switch between “T”
source inputs.
8
+ (PLUS) Button: Press to move up or adjust selections within OSD
menus. When not in a menu, press to manually switch between “R”
source inputs.
9
ENTER/INFO Button: When inside an OSD menu, press to conrm a
selection or to go deeper into a menu item. When not in a menu, press
to activate the Information OSD.
6.2 Rear Panel
USB/SERVICELANRS-232IN
HDMI
OUTDP ININOUT
DC 12V
TX RX
INOUT
AUDIO
IR
CAT6A/7
1
2 3 4 5 6
7 8
9
10
1
HDMI OUT Port: Connect to an HDMI TV, monitor, or amplier for
digital video and audio output.
2
HDMI IN Port: Connect to HDMI source equipment such as a media
player, game console, or set-top box.
3
DP IN Port: Connect to DisplayPort source equipment such as a PC or
laptop.
4
CAT6A/7 Port: Connect directly to a compatible transceiver for bi-
directional Point-to-Point extension, or to a 10 Gigabit Ethernet switch
for distributed matrixing (requires IP Master Controller or control
software).
Note: If the connected network switch supports the IEEE 802.3at-2009
PoE (Power over Ethernet) standard, this unit can optionally be powered
directly via this Ethernet port.
Bekijk gratis de handleiding van CYP SDV-CTRX-BD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | SDV-CTRX-BD |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2606 MB |
