CYP SDV-CS8 handleiding
Handleiding
Je bekijkt pagina 19 van 76
14
independent HDMI audio streams, drag the “All” button down to
the “Stop” button.
Note: When a receiver’s HDMI Audio is set to “Follow Video in Genlock
Mode”, and scaling on that output has been disabled (Bypass), the
audio output on that receiver cannot be stopped by using this control.
HDMI Audio Receiver: This section provides drag-and-drop
buttons for all receivers detected by the system as well as a button
target to stop one or all independent HDMI audio streams.
Note: When a receiver’s HDMI Audio is set to “Follow Video in Genlock
Mode” and scaling on that output has been disabled (Bypass), the
HDMI audio routing selection is ignored and the audio embedded with
the HDMI source will always be output. In these instances a (!) mark will
be displayed.
Stop Stream: To stop the HDMI audio stream on a single display,
drag the display down to the “Stop” button at the bottom of the
window, then release the mouse button. To stop HDMI audio on
ALL video outputs, drag the “All” button down to the “Stop” button.
Note: When a receiver’s HDMI Audio is set to “Follow Video in Genlock
Mode”, and scaling on that output has been disabled (Bypass), the
independent audio route will be stopped, however the HDMI embedded
audio will continue to be output normally.
Bekijk gratis de handleiding van CYP SDV-CS8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | SDV-CS8 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6049 MB |
