CYP PUV-2608TX handleiding
Handleiding
Je bekijkt pagina 10 van 56
5
6.2 Rear Panel
USB-C
DP HDMI 1 HDMI 2 AUDIO RS-232 DC 24V
IR
CAT5e/6/7 OUT BLASTEREXTENDER
BYPASS
IN
CONSOLE
TX RXTX RX
1 2 4 8 9 105 63 7
1
USB-C IN Port: Connect to USB Type-C video source or USB host
equipment such as a PC or laptop.
Note: 60W of power can be provided to connected USB-C devices, but only
when the unit is powered locally. Due to its support of full USB 3.0 data
transfer speeds, video bandwidth is limited to UHD.
2
DP IN Port: Connect to DisplayPort source equipment such as a PC or
laptop.
3
HDMI 1~2 IN Ports: Connect to HDMI source equipment such as
media players, game consoles, or set-top boxes.
4
AUDIO IN Port: Connect to the stereo analog output of a device such
as a CD player or PC for embedding into the HDBaseT output.
5
RS-232 CONSOLE 3-pin Terminal Block: Connect directly to a PC,
laptop, or other serial control device with a 3-pin adapter cable to
send RS-232 commands to control the unit.
6
RS-232 BYPASS 3-pin Terminal Block: Connect to a PC, laptop, or
other serial control device with a 3-pin adapter cable for the extension
of RS-232 signals to the other end of the HDBaseT connection.
Note: The bypass port’s transmission settings are configured via the RS-
232 automation tab. (See section 6.5.3)
7
CAT.5e/6/7 OUT Port: Connect to a compatible HDBaseT receiver with
a single Cat.5e/6/7 cable for transmission of all data signals. Power via
PoH will also be supplied to this unit when connected to a compatible
PSE receiver.
8
IR IN Port: Connect to an IR Extender to receive IR control signals and
extend them to devices connected to the other end of the HDBaseT
connection. Ensure that the remote being used is within direct line-of-
sight of the IR Extender.
9
IR OUT Port: Connect to the provided IR Blaster to transmit IR signals
from the other end of the HDBaseT connection to devices within
direct line-of-sight of the IR Blaster.
10
DC 24V Port: Plug the 24V DC power adapter into this port and
connect it to an AC wall outlet for power. (Optional, if powered via
PoH)
Bekijk gratis de handleiding van CYP PUV-2608TX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | PUV-2608TX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4000 MB |
