CYP PUV-2100-AVLC-KIT handleiding
Handleiding
Je bekijkt pagina 11 van 24
11
6.3 Receiver Front Panel
AUDIO
SERVICE ARC
OPT
HQ
STD
POWER
LINKSWITCH
SERVICE ARC
OPT
HQ
STD
POWER
LINKSWITCH
AUDIO
PUV-2100RX-AVLC
1 2 3 4 5
1
SERVICE Port: This port is reserved for firmware update and serial
control use only.
2
ARC & OPT LEDs: These LEDs illuminate to indicate the current digital
audio source selected for sending to a compatible Transmitter’s
optical output.
Note: Using ARC as a source requires the HDMI output to be connected to
an ARC-compliant TV with ARC enabled.
3
AUDIO SWITCH Button: This switch allows the user to select which
digital audio source to send back to a compatible Transmitter. A single
press toggles between modes.
ARC (Audio Return Channel): Sends the digital audio from a
connected ARC-compliant TV’s HDMI input.
OPT (Optical): Sends the digital audio from the Optical Input port.
4
HQ/STD LEDs: These LEDs illuminate to indicate which AVLC mode
is selected by the connected Transmitter: HQ (High Quality) or STD
(Standard Quality).
5
POWER LED: This LED will illuminate to indicate the unit is on and
receiving power.
Note: A compatible 48V PSE Transmitter is required to power this Receiver.
LINK LED: This LED will illuminate solidly when a live connection with
a compatible Transmitter is active.
Bekijk gratis de handleiding van CYP PUV-2100-AVLC-KIT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | PUV-2100-AVLC-KIT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1724 MB |
