CYP PUV-1620S-TX handleiding
Handleiding
Je bekijkt pagina 8 van 24
8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWERIN HDMI MENUENTER
-
+
VGA
SERVICEPUV-1620S-TX
1 2 3 4 5 6 7
1
SERVICE: This is reserved for firmware update use only.
2
POWER LED: This LED will illuminate to indicate the unit is on and
receiving power.
3
IN Button & LEDs: Press this button to switch between the HDMI
and VGA inputs. The LED will illuminate to indicate which source is
currently selected.
4
MENU: Press to enter the OSD menu, or to back out from menu items.
Note: Pressing “MENU” and “+” together will reset the output resolution
to XGA (1024×768@60Hz). Pressing “Menu” and “−” together will reset the
output resolution to 1080p@60Hz.
5
−: Press to move down or adjust selections within OSD menus.
6
+: Press to move up or adjust selections within OSD menus.
Note: Pressing and holding the “+” and “−” keys at the same time for more
than 3 seconds will perform a factory reset of the unit.
7
ENTER: Press to confirm a selection within the OSD or to go deeper
into a menu item.
Bekijk gratis de handleiding van CYP PUV-1620S-TX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | PUV-1620S-TX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1701 MB |
