CYP PUV-1350PL-KIT handleiding
Handleiding
Je bekijkt pagina 13 van 84
7
6.4 Front Panel (Receiver)
PWR UPDATEUSB/FW
MENU
ENTER
-
+
VOLUME
MUTE
PUV-1350PLA-RX
1 2 3 4 5 6
1
PWR LED: This LED will illuminate to indicate the unit is on and
receiving power.
2
USB/FW Port (Type-A): Connect directly to a standard USB
peripheral such as a mouse, keyboard or flash drive to extend its USB
functionality to the port on the connected transmitter. Firmware
updates may also be performed using this port.
3
UPDATE Switch: This switch is reserved for firmware update use only.
Note: The default setting is "OFF" (to the right).
4
MENU Button: Press to enter the OSD menu, or to back out from
menu items.
Note: Pressing and holding the Menu button while powering the unit on
will perform a factory default reset of the unit.
5
VOLUME - (MINUS)/+ (PLUS) Buttons: Press to move up and down
or adjust selections within OSD menus. Pressing these buttons while
not in a menu will increase or decrease the amplified analogue audio
output (R/L) volume.
Note: The non-amplified analogue audio output’s volume is not affected
by these controls.
6
ENTER/MUTE Button: Press to confirm a selection within the OSD
or to go deeper into a menu item. Pressing this button while not in a
menu will toggle the mute function of the amplified analogue audio
output (R/L).
Note: The non-amplified analogue audio output is not affected by this
controls.
Bekijk gratis de handleiding van CYP PUV-1350PL-KIT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | PUV-1350PL-KIT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5989 MB |
