CYP PUV-1250PL-TX handleiding
Handleiding
Je bekijkt pagina 29 van 44
29
COMMAND DESCRIPTION AND PARAMETERS
set out auto mode N1 Set the auto switching behavior of the unit.
Available values for N1:
0 [Disabled]
1 [Auto switch]
get out auto mode Show the current auto switching mode of
the unit.
get ipconfig Show the unit's current IP configuration
information.
set ip mode N1 Set the IP address assignment mode.
Available values for N1:
0 [Static IP mode]
1 [DHCP mode]
get ip mode Show the current IP address assignment
mode.
set ipaddr N1 Set the unit's static IP address.
N1 = X.X.X.X [X = 0 ~ 255]
get ipaddr Show the unit's current IP address.
set netmask N1 Set the unit's static netmask.
N1 = X.X.X.X [X = 0 ~ 255]
get netmask Show the unit's current netmask.
set gateway N1 Set the unit's static gateway address.
N1 = X.X.X.X [X = 0 ~ 255]
get gateway Show the unit's current gateway address.
set webgui password N1 Set the WebGUI login password.
N1 = {Password} [16 characters max]
get webgui password Show the current WebGUI login password.
Bekijk gratis de handleiding van CYP PUV-1250PL-TX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | PUV-1250PL-TX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3093 MB |
