CYP PUV-1250PL-TX handleiding
Handleiding
Je bekijkt pagina 17 van 44
17
6.5.2 Automation Tab
The Automation tab provides control over the unit’s automatic control
command broadcast behavior when any of the specified Automation
Events occur. Automation commands are sent to the connected display
device via standard CEC.
1) Event: Use the dropdown to select the Automation Event to configure.
Available Automation Events are:
– Power On: This unit is powered on.
– Out A Source Active: The currently selected input changes
from inactive to active.
– Out A Source Lost: The currently selected input changes from
active to inactive.
■
CEC: Enable or disable sending a CEC command when the
currently selected Automation Event is activated.
Note: CEC support must also be enabled on the connected HDMI
display device.
■
Delay: Set the length of time, in seconds, that the specified
Automation Event must continue to be true before sending the
defined command.
Bekijk gratis de handleiding van CYP PUV-1250PL-TX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | PUV-1250PL-TX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3093 MB |
