CYP OR-PIP42SDMO handleiding
Handleiding
Je bekijkt pagina 14 van 88
7
6.3 Module Card Installation
To install this module card into your unit, it must have at least one
available CYP Module Slot.
(1) Prior to installation, power the unit completely o.
(2) Remove the dummy faceplate that is covering the card module slot by
unscrewing both screws.
Note: Be sure to store the dummy faceplate, and its screws, somewhere
safe, in case you need to use them again later.
(3) Align the card with the guiderails to each side of the module slot, and
gently slide the module card into the slot until its faceplate is ush
with the back of the unit.
(4) Secure the module to the unit by using the supplied screws.
(5) The unit may now be powered back on. The card’s power LED will
light up to indicate it is receiving power. In most cases, the card will be
automatically detected by the unit and be available for use.
Bekijk gratis de handleiding van CYP OR-PIP42SDMO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | OR-PIP42SDMO |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6122 MB |
