CYP OR-PIP42SDMO handleiding
Handleiding
Je bekijkt pagina 11 van 88
4
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
SERVICE MODE IN 1 IN 1IN 2 IN 2IN 3 IN 3IN 4 IN 4
A
B
AB
OUT
1
MIC 1
212
MIC 2
POWER
-
+
WIN 1WIN 2WIN 3WIN 4
WIN SEL.
MENU
ENTER
FUNCTION
OR-PIP42
SDMO
1 2 3 4
1110
5 6 7 8 9
1
SERVICE Port (USB 2.0): This port is reserved for rmware update and
user EDID/logo upload use only.
2
POWER Button & LED: Press this button to power the unit on (green
LED) or place it into stand-by mode (red LED).
Note: Ethernet and RS-232 remain active when the unit is in stand-by
mode.
3
MODE Button: Press this button to sequentially switch the
operational mode between Matrix, PiP, PoP, and Quad.
4
WIN/IN 1~4 Output A/B LEDs: In Matrix mode, these LED’s indicate
the currently selected sources (IN 1~4) routed to each of the two
outputs (OUT A~B). When the unit is in a multi-windowing mode (PiP/
PoP/Quad/Preset) the top row of LEDs represents the current window
(WIN 1~4) and the bottom row represents the currently assigned
input (IN 1~4).
Note: When source selection is active the associated LEDs will blink.
5
WIN SEL OUT A/B Buttons: In Matrix mode, press either of these
buttons to activate discrete source selection for the associated output.
In multi-windowing modes (PiP, PoP, Side-by-Side) either button will
activate window selection, and additional presses will sequentially
step through the available windows. Source selection mode will
automatically be deactivated after 5 seconds with no user input.
Note: These buttons only activate the ability to change sources. Actual
source selection is accomplished using the IN 1~4 buttons.
Bekijk gratis de handleiding van CYP OR-PIP42SDMO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | OR-PIP42SDMO |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6122 MB |
