CYP OR-M42HC-USB handleiding
Handleiding
Je bekijkt pagina 10 van 40

5
6.2 Rear Panel
RS-232 DC 24V
TX
LAN IN 4 IN 3 OUT B OUT A
LINE OUT
IN 2IN 1
RX
SERVICE
1 2 3 4 5
7 8
6
1
USB-C IN 1~2 Ports: Connect to USB Type-C host or video source
equipment such as a PCs or laptops. When the USB-C port has “USB3.2”
support active, this port can support 4K60 A/V, Ethernet, and USB
simultaneously. When “USB3.2” is disabled, this port will support
full bandwidth 4K60 A/V content but USB data functionality will be
limited to USB 2.0 levels. Input 1 provides up to 45W and input 2
provides 30W of power to connected device.
Note 1: Not all devices with USB Type-C ports can support video output.
Please verify that the device supports video output from the USB Type-C
port before attempting to use it as a video source.
Note 2: When USB3.2 is enabled, the output resolution may vary from
USB-C sources.
2
HDMI IN 3~4 Ports: Connect to HDMI source equipment such as
media players, game consoles, or set-top boxes. DVI source are
supported with the use of an HDMI to DVI adapter.
USB 3.2 Host 3~4 Ports (Type-B): Connect directly to a standard USB
hosts such as a PC or laptop to extend their USB functionality to all
currently connected USB devices.
3
HDMI OUT A~B Ports: Connect to HDMI TVs, monitors, or amplifiers
for digital video and audio output.
LINE OUT Ports: Connect to powered speakers or amplifiers for
analog stereo audio output.
4
RS-232 CONSOLE 3-pin Terminal Block: Connect directly to a PC,
laptop, or other serial control device with a 3-pin adapter cable to
send RS-232 commands to control the unit.
5
LAN Port: Connect directly, or through a network switch, to your PC/
Bekijk gratis de handleiding van CYP OR-M42HC-USB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | CYP |
Model | OR-M42HC-USB |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 2925 MB |