CYP OR-42CD-4K22 handleiding
Handleiding
Je bekijkt pagina 8 van 28
8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
ON
1234
POWER
OR-42CD-4K22
AUTO 1234DISPLAY
ON/OFF
DISPLAY AUDIO EDID
SERVICE
AUDIO OUT
A
OUT
B
7654321 1098 11
1
IR Window: Accepts IR signals from the optional IR remote for control
of this unit only.
2
POWER LED: This LED will illuminate to indicate the unit is on and
receiving power.
3
AUTO A/B LEDs: These LEDs will illuminate to indicate if auto
switching has been enabled on the associated output.
4
INPUT 1~4 A/B LEDs: The illuminated LEDs indicate which source is
currently selected for the associated output.
5
DISP. A/B LEDs: These LEDs will illuminate to indicate when a valid
sink has been detected on the associated output port. When no sink is
detected the LED will remain off.
6
AUDIO A/B LEDs: The illuminated LED indicates which output is
selected as the source for the analogue audio output. If both LEDs are
off, the analogue output is muted.
Note: Only LPCM 2.0 audio sources are supported.
7
OUT A/B Buttons: Press these buttons to sequentially switch through
the available inputs for the associated output. Pressing and holding
a button for 3 seconds will enable or disable that output’s auto
switching function.
8
DISP. Button: Press this button to turn the connected displays on or
off using CEC or RS-232 commands.
Note: CEC functionality must be enabled on the connected displays. Not
all displays support all CEC commands.
9
AUDIO Button: Press this button to sequentially switch the analogue
audio output source between Output A, Output B, and mute.
Bekijk gratis de handleiding van CYP OR-42CD-4K22, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | OR-42CD-4K22 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1958 MB |
