CYP MED-PJ-8320 handleiding
Handleiding
Je bekijkt pagina 32 van 92
27
with a black screen if there are no live sources and no operations have
been executed on the unit. Setting this to “Always On” forces the unit
to always output sync.
2) Firmware Update: To update the rmware via USB, select “Yes” and
then insert a USB stick containing the new rmware into the Service
port. The upload will occur immediately.
Note: The USB stick must contain, in the root directory, a compatible and
properly named (*.BIN) firmware file.
3) User EDID Reset: Select “Yes” to reset the unit’s User EDIDs to their
factory default states.
4) Factory Reset: Select “Yes” to reset the unit to its factory default state.
After the reset is complete, the unit will reboot automatically.
5) User Boot Logo Clear: Select “Yes” to remove all user uploaded boot
graphics.
6) DVI-I In: Sets the video mode of the DVI-I port. Select “Digital” for
digital DVI sources, select “Analog” for analog VGA sources.
Bekijk gratis de handleiding van CYP MED-PJ-8320, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | MED-PJ-8320 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6462 MB |
