CYP MA-U42 handleiding
Handleiding
Je bekijkt pagina 24 van 60
19
6.4.6 System Tab
This tab provides system information, network conguration options,
system conguration resets, and a rmware update function.
1) System:
Web User Setting: This section provides a way to change the
username and password for the Administrator account. Click on
“Save” to conrm and activate any changes made to these settings.
Note: The default username and password is “admin”.
Network: The unit’s IP mode may be switched between Static IP
or DHCP. In Static IP mode the IP, netmask and gateway addresses
may be manually set. When in DHCP mode, the unit will attempt to
connect to a local DHCP server and obtain IP, netmask and gateway
addresses automatically. Please press “Save” after making any
changes to the IP conguration or mode.
Note: If the IP address is changed then the IP address required for
WebGUI/Telnet access will also change accordingly.
Reset to Default: Press the “Routing Reset” button to reset all I/
O routing congurations to the factory defaults. Press the “Factory
Reset” button to reset the unit to its factory default state. After the
factory reset is complete, the unit will reboot automatically.
Bekijk gratis de handleiding van CYP MA-U42, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | MA-U42 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4622 MB |
