CYP MA-421 handleiding
Handleiding
Je bekijkt pagina 12 van 72
12
6.3 Remote Control
6.3.1 IR Remote (Unit Control)
This unit’s IR remote provides control
over the unit directly, as well as control
over additional external devices through
the assignment of learned IR commands.
The following buttons, in “Standard”
mode provide direct control over the
unit itself. Switching to “Advanced” mode
allows these buttons to also be used to
control external device functions.
1
POWER Button: Press and hold this
button for over 3 seconds to power
the unit on or place it into standby
mode.
Note: A short press of this button will
send a user defined IR command to the
current source device.
2
ADV. Button: Pressing this button toggles the unit between using the
“Standard” and “Advanced” IR remote button definitions.
3
ZONE A & ZONE B IN 1~4 Buttons: Press any of these buttons to
switch immediately to the corresponding input for display in Zone A
or Zone B respectively.
4
AUDIO Buttons
SOURCE Button: Press this button to sequentially switch through the
available audio sources for both analogue outputs.
MUTE Button: Press to toggle between muting and unmuting the
analogue audio output.
Note: By default, the mute button only controls the amplified output. This
behavior can be adjusted via RS-232.
VOL+/VOL− Buttons: Press these buttons to increase or decrease the
amplified analogue audio output volume.
123
456
789
0
Adv.
1
3
4
2
Bekijk gratis de handleiding van CYP MA-421, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | MA-421 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6086 MB |
