CYP MA-401 handleiding
Handleiding
Je bekijkt pagina 10 van 68
4
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
1 234 ARCHDMI
IR SERVICEANALOG AUDIO MUTE Vol –Vol +POWERHDMI IN
MA-401
1 2
3 4
5
6 7
1
POWER Button and LED: Press this button to power the unit on (green
LED) or place it into standby mode (red LED).
Note: If the IR Auto Power Control function is turned on for any inputs/
outputs, this button will also turn on/off those devices that have IR
commands stored.
2
HDMI IN and LEDs: Press this button to sequentially switch through
the available inputs. The LED will illuminate to indicate which source is
currently selected.
3
Analogue AUDIO Button and LEDs: Press this button to toggle
between HDMI Out or ARC as the audio source for both analogue
outputs. The LED will illuminate to indicate which source is currently
selected.
Note: If the display connected to the HDMI output does not support ARC,
no audio will be heard when the ARC source is selected.
4
MUTE Button and LED: Press to toggle between muting and
unmuting the analogue audio output. The LED will illuminate when
mute is active.
Note: By default, the mute button only controls the amplified output. This
behavior can be adjusted via RS-232.
5
VOL−/VOL+ Buttons and LEDs: Press or hold the +/− (plus/minus)
buttons to increase or decrease the amplied analogue audio output
volume. The LEDs will illuminate progressively to indicate the current
volume level.
6
IR Window: Accepts IR signals from the included IR remote for control
of this unit, IR bypass, and to activate the transmission of learned IR
codes.
7
SERVICE Port: This port is reserved for rmware update use only.
Bekijk gratis de handleiding van CYP MA-401, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | MA-401 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5309 MB |
