CYP IP-XTREAM-R4K handleiding
Handleiding
Je bekijkt pagina 9 van 60
4
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
PWR LAN
VIDEO
MENU ENTER
-
+
ENCODER
STREAM
STREAMRECORD
IP-XTREAM-R4K
8
976
32
541
1
PWR LED: This LED will illuminate to indicate the unit is on and
receiving power.
2
ENCODE LED: The LED will illuminate when the unit is encoding.
3
LAN LED: This LED will illuminate when a live Ethernet connection is
detected.
4
STREAM LED: This LED will ash when a targeted stream is active.
5
VIDEO LED: This LED will illuminate when a video source is connected
and active.
6
USB 2.0 (Type-A) Port: Attach a standard USB thumb drive for
storage of recorded video.
Note: Storage media must be formatted as FAT32 or exFAT. Video files are
stored in *.mp4 format. Up to 1A is available to power an external USB
device.
7
RECORD Button: Press this button to immediately start recording to
the designated recording target, and press again to immediately stop
any current recording session.
8
STREAM Button: Press this button to start all RTMP (service targeted)
streams, and press again to stop them all.
Note: The primary stream is always active.
9
Menu Access Button Block: MENU Button: Press to enter the OSD
menu, or to back out from menu items.
- (MINUS)/+ (PLUS) Buttons: Press to move up and down or adjust
selections within OSD menus.
ENTER Button: Press to conrm a selection within the OSD or to go
deeper into a menu item.
Bekijk gratis de handleiding van CYP IP-XTREAM-R4K, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | IP-XTREAM-R4K |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4339 MB |
