CYP IP-XTREAM-R4K handleiding
Handleiding
Je bekijkt pagina 27 van 60
22
6.5.3 Transmitter Tab
This tab provides access to multicast and port conguration, video prole
control, service streaming congurations, EDID settings, and Audio
routing control.
1) Casting Mode: Set the encoder’s multicast IP conguration and set
the unit’s streaming port. After making changes, press the “Save”
button to activate them.
■
Multicast IP: Set the multicast group IP address used by decoders
that require it.
Note: It is recommended to select an address between 224.2.0.1 and
224.2.255.255.
■
TTL: Set the Time to Live routing value for the multicast group.
■
Port: Set the unit’s general streaming port.
Note: All connected decoders must be set to the same port.
2) Video Prole: This section provides access to the settings which
are used when streaming to standard network targets such as web
browsers or PCs running video software. The Primary stream’s settings
can be congured here. Pressing the “Save” button will activate the
settings for the stream.
Note: The Primary channels is always active and available to be viewed
directly by connecting to the unit using 3rd party video player software
such as VLC or PotPlayer.
Bekijk gratis de handleiding van CYP IP-XTREAM-R4K, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | IP-XTREAM-R4K |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4339 MB |
