CYP IP-A750RX handleiding
Handleiding
Je bekijkt pagina 25 van 32
20
COMMAND
Description and Parameters
get showme
Show the current state of the showme function.
set stream cast mode N1
Set the AoIP transmitter’s network broadcast mode.
Available values for N1:
UNICAST [Unicast mode]
MULTICAST [Multicast mode]
get stream cast mode
Show the AoIP transmitter’s current network broadcast mode.
set tx 1 audio in 1 route rx N1 A
Route the specied transmitter’s current audio input to this receiver’s
audio outputs.
N1 = 0~255 [Channel index value]
get tx 1 audio in 1 route rx
Show the channel index number of the transmitter whose audio is
currently routed to this receiver.
set tx 1 uart route rx N1
Route the specied transmitter’s RS-232 input to this receiver’s RS-
232 output.
N1 = 0~255 [Channel index value]
get tx 1 uart route rx
Show the channel index number of the transmitter whose RS-232 is
currently routed to this receiver.
Note: Commands will not be executed unless followed by a carriage return.
Commands are not case-sensitive.
Bekijk gratis de handleiding van CYP IP-A750RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | IP-A750RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2285 MB |
