CYP IP-9000RX handleiding
Handleiding
Je bekijkt pagina 35 van 60
30
COMMAND
Description and Parameters
set video wall project N1 N2 N3 N4
Set the video wall’s total horizontal (N1), vertical (N2) display count and
position on receiver.
N1 = 1~16 [Horizontal display count]
N2 = 1~16 [Vertical display count]
N3 = 0~15 [Column]
N4 = 0~15 [Row]
set video wall position N1 N2
Set the display’s position within the video wall on receiver. (Cannot exceed
the video wall’s horizontal and vertical display count.)
N1 = 0~15 [Column]
N2 = 0~15 [Row]
get video wall position
Show the display’s position within the video wall on receiver.
set video wall bezel N1 N2 N3 N4
Set the video wall display’s bezel compensation values on receiver. (unit:
0.1mm)
N1 = 0~99999 [Total display width]
N2 = 0~99999 [Video width]
N3 = 0~99999 [Total display height]
N4 = 0~99999 [Video height]
get video wall bezel
Show the video wall display’s bezel compensation values on receiver. (unit:
0.1mm)
set warping keep aspect ratio N1
Enable or disable the aspect ratio mode on receiver.
Available values for N1:
ON [Fit In]
OFF [Stretch Out]
Bekijk gratis de handleiding van CYP IP-9000RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | IP-9000RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4713 MB |
