CYP IP-9000RX handleiding
Handleiding
Je bekijkt pagina 24 van 60
19
6.5.4 Functions Tab
The Functions tab provides control over the receiver’s output resolution,
video loss settings, as well as a wide variety of optional features and
functions, including USB and serial control extension. Changes made
to these settings typically require a reboot of the unit. After clicking on
“Apply” please follow the reboot instructions in the WebGUI, if necessary.
1) Video over IP: This section allows control over functions of the
receiver for controlling the behavior upon signal loss.
Copy EDID: When multiple receivers are connected to a single
transmitter in multicast mode, this check box selects which of the
receivers should send its EDID to the transmitter for use with the
source.
Note: This option is only available in multicast mode. Only one receiver
within the same streaming group should have this checked at a time to
avoid conflicts.
Video Loss Options: Use the drop down to set the length of time to
wait for a lost source to return before showing the Link Lost screen.
Available options are: 3, 5, 10, 20, 30, 60 seconds, or Never Timeout.
If the “Turn off screen” checkbox is checked, the HDMI output will
be completely disabled, including sync, after the timeout time has
passed.
2) Display Setup: This section allows control over functions of the
receiver for controlling the behavior upon no video screen.
Bekijk gratis de handleiding van CYP IP-9000RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | IP-9000RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4713 MB |
