CYP IP-9000RX handleiding
Handleiding
Je bekijkt pagina 11 van 60
6
8
IP Button: Press this button to sequentially display the current
broadcast channel and IP address.
9
CH. ID Display: Display information of current broadcast channel and
IP address.
6.2 Rear Panel
HDMI OUTDC 12V MIC IN LINE OUTUSB 2.0LAN(PoE)
Upgradable to Dante AV-A
1 2 3 4 5 6
1
DC 12V Port: Plug the 12V DC power adapter into the unit and
connect it to an AC wall outlet for power.
Note: Optional, not needed if the unit is powered via PoE.
2
LAN (PoE) Port: Connect via a Gigabit Ethernet switch to compatible
transmitters to receive video and data, or to a PC/laptop to control the
unit via WebGUI.
Note: This unit can be powered directly by the connected Gigabit Ethernet
switch if it provides PoE (802.3af).
3
HDMI OUT Port: Connect to HDMI TVs, monitors or amplifiers for
digital video and audio output.
4
USB 2.0 (Type-A) Ports: These 3 USB 2.0 slots provide connections for
USB devices requiring higher transfer speeds such as thumb drives.
5
MIC IN Port: Connect to an analogue microphone using a 3.5mm
plug. This audio will be sent to the analogue audio output on the
currently routed transmitter. (Unicast mode ONLY)
Note: The Mic In audio channel back to the transmitter is only active
when an analogue source is also connected to the Line In port on the
transmitter.
6
LINE OUT Port: Outputs stereo audio from the currently routed
transmitter (LPCM 2.0 sources only). Connect to powered speakers or
an amplifier for stereo analogue audio output.
Bekijk gratis de handleiding van CYP IP-9000RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | IP-9000RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4713 MB |
