CYP IP-7050RX-TG handleiding
Handleiding
Je bekijkt pagina 25 van 48
20
Video Loss Options: Use the drop down to set the length of time to
wait for a lost source to return before showing the Link Lost screen.
Available options are: 3, 5, 10, 20, 30, 60 seconds, or Never Timeout.
If the “Turn off screen” checkbox is checked, the HDMI output will
be completely disabled, including sync, after the timeout time has
passed.
Scaler Output Mode: Use the drop down list to select the
preferred output resolution for the receiver’s scaler. Selecting one
of the specific resolutions will output all video at that resolution.
Selecting “Pass-Through” will output the source video at its original
resolution. Selecting “Native” will attempt to scale to the detected
native resolution of the display connected to the HDMI output.
Front Panel Button Locks: Locks or unlocks the ability to change
the associated functions using their front panel buttons.
2) USB over IP: This section provides controls for the USB over
IP extension functionality, including enabling/disabling USB
support, changing the USB operational mode, and enabling special
compatibility modes.
Enable USB over IP: Unchecking this checkbox will completely
disable support for USB over this stream. This option should
generally remain checked, but, if USB support is not required,
disabling this feature can save some bandwidth.
Operation Mode: Sets the USB extension mode. Available options
are Auto, Active on link (Unicast optimised), and Active per
request (Multicast optimised). Auto mode is set by default and will
automatically select the correct mode depending on the broadcast
mode of the unit.
Bekijk gratis de handleiding van CYP IP-7050RX-TG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | IP-7050RX-TG |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3740 MB |
