CYP IP-7050RX-TG handleiding
Handleiding
Je bekijkt pagina 24 van 48
19
6.5.4 Functions Tab
The Functions tab provides control over the receiver’s output resolution,
video loss settings, as well as a wide variety of optional features and
functions, including USB and serial control extension. Changes made
to these settings typically require a reboot of the unit. After clicking on
“Apply” please follow the reboot instructions in the WebGUI, if necessary.
1) Video over IP: This section allows control over many critical functions
of the receiver including: enabling/disabling the VoIP stream,
controlling the scaler/output resolution, controlling the behavior
upon signal loss, and controlling the front panel button locks.
Enable Video over IP: Unchecking this checkbox will disable the
VoIP stream completely. This option should always remain checked
unless troubleshooting is being performed.
Copy EDID: When multiple receivers are connected to a single
transmitter in multicast mode, this check box selects which of the
receivers should send its EDID to the transmitter for use with the
source.
Note: This option is only available in multicast mode. Only one receiver
within the same streaming group should have this checked at a time to
avoid conflicts.
Bekijk gratis de handleiding van CYP IP-7050RX-TG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | IP-7050RX-TG |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3740 MB |
