CYP IP-7000TX handleiding
Handleiding
Je bekijkt pagina 10 van 44

8
12
VGA LOOPBACK OUT: Connect to an analogue VGA monitor to locally
view the connected VGA or HDMI (non-HDCP, 1080p or lower) source.
6.2 Transmitter's Rear Panel
DC 5V
USB
VGA IN HDMI IN
LINE IN
LINE OUT
LAN (PoE)
7654321
1
DC 5V: Plug the 5V DC power adapter into the unit and connect it to
an AC wall outlet for power. (Optional if powered by PoE)
2
USB: Connect directly to a PC to extend its USB functionality to the
ports on the connected Receiver.
3
LAN (PoE): Connect via a Gigabit Ethernet switch to compatible
Receiver(s) to transmit data, and to a PC/laptop to control the unit via
WebGUI.
Note: This unit can be powered directly by the connected Gigabit Ethernet
switch if it provides PoE (802.3af).
4
VGA IN: Connect to VGA source equipment such as a PC or laptop.
Note: PC text and content with ne details may display with some visual
artifacts when transmitted at 4K@60Hz (YUV 4:2:0).
5
HDMI IN: Connect to HDMI source equipment such as a media player,
game console or set-top box.
6
LINE IN: Connect to the stereo analogue output of a device such as a
CD player or PC.
Note: When a live audio source is connected to the Line In, it will be
automatically embedded into the transmitted signal, and will completely
replace any existing HDMI audio.
7
LINE OUT: Connect to powered speakers or an amplier for stereo
analogue audio output. This will output the audio from the Mic In on
the connected Receiver.
Note: This function is only available in Unicast mode. The Mic In audio
channel from the Receiver is only active when an analogue source is also
connected to the Line In port on the Transmitter.
Bekijk gratis de handleiding van CYP IP-7000TX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | CYP |
Model | IP-7000TX |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 3389 MB |