CYP IP-7000C-TX handleiding

48 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 9 van 48
4
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter's Front Panel
POWER
LINK RS-232
TXRX
IR LINK
SWITCH
Anti-DITHER
MODE
RESET
ISPISP
SEL
IR
OUT
IR
IN
IP-7000C-TX
87654321 9 1011
1
POWER LED: This LED will ash while the unit is powering on and will
illuminate solidly once it is ready to be used.
2
LINK LED: If the transmitter has no network connection the LINK LED
will not illuminate. While the transmitter is attempting to establish
a connection with a receiver the LINK LED will ash. When the
transmitter has established a stable connection with a receiver the
LINK LED will illuminate solidly.
3
RS-232 3-pin Terminal Block: Connect to a PC, laptop, or serial
controllable device with a 3-pin adapter cable for the extension
of RS-232 signals to the currently routed receiver. The baud rate is
congurable, but the default baud rate is 115200.
Note: When the transmitter is in multicast mode every connected receiver
unit can send RS-232 commands to the transmitter and commands sent
from the transmitter side will be sent to all associated receivers.
4
ISP SEL Switch: This is for factory use only.
Note: By default this is set to the left (towards the RS-232 port) and allows
normal RS-232 functionality. Setting this switch to the right enables ISP
engineering mode.
5
IR OUT Port: Connect to the provided IR Blaster to transmit IR signals
sent from the associated receiver to devices within direct line-of-sight
of the IR blaster.
6
IR IN Port: Connect to the provided IR Extender to extend the IR
control range of remotely located devices. Ensure that the remote
being used is within direct line-of-sight of the IR Extender.
Note: When the transmitter is in multicast mode the IR signal is sent to all
associated receivers.

Bekijk gratis de handleiding van CYP IP-7000C-TX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkCYP
ModelIP-7000C-TX
CategorieNiet gecategoriseerd
TaalNederlands
Grootte3554 MB