CYP IP-7000C-TX handleiding
Handleiding
Je bekijkt pagina 24 van 48
19
6.5.4 Functions Tab
The Functions tab provides control over the transmitter’s video source
selection, streaming bandwidth/quality settings, as well as a wide variety
of optional features and functions, including USB and serial control
extension. Changes made to these settings typically require a reboot of
the unit. After clicking on “Apply” please follow the reboot instructions in
the WebGUI, if necessary.
1) Video over IP: This section allows control over video input selection
as well as the streaming bit rate and quality.
Source Selection: Select the preferred input source, HDMI or
Type-C or enable the auto scan function of the unit by checking the
“Enable Auto Scan” checkbox.
Note: Once searching for a new source begins, the input will
automatically switch back and forth until a valid video source is
detected.
Maximum Bit Rate: Set the maximum bit rate that can be used
to the output video stream. Available options are: Unlimited,
400Mbps, 200Mbps, 100Mbps, 50Mbps. Selecting “Unlimited” will
use up to the maximum available bandwidth in order to maintain a
full framerate video stream.
Note: While it is generally suggested to select “Unlimited” when
streaming 4K video sources, the amount of bandwidth required can be
very large and will limit the number of concurrent video streams.
Bekijk gratis de handleiding van CYP IP-7000C-TX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | IP-7000C-TX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3554 MB |
