CYP EL-8400VA handleiding
Handleiding
Je bekijkt pagina 12 van 112
7
8
TRIGGER IN 10-pin Terminal Block: Connect to the Trigger Control
Keypad (Optional) or any device with trigger switch functionality
such as window security alarms, motion detectors, door switches, etc.
Each of the 8 triggers will activate an assigned unit function when
triggered.
Note: A minimum of 5V DC is required to activate a trigger.
9
CAT 5e/6/7 IN Port: Connect to compatible HDBaseT transmitters
with a single Cat.5e/6/7 cable for reception of all data signals. PoH will
also be supplied to connected compatible PD transmitters.
10
USB-C IN Port: Connect to USB Type-C host or video source
equipment such as a PC or laptop. When the USB-C port has “Super
Speed” support active, this port can support 4K30 A/V and USB
simultaneously.
Note: Not all devices with USB Type-C ports can support video output.
Please verify that the device supports video output from the USB Type-C
port before attempting to use it as a video source.
11
DP IN Port: Connect to DisplayPort source equipment such as a media
player, PC, or set-top box.
12
HDMI IN 4~6 Ports: Connect to HDMI source equipment such as
media players, game consoles, or set-top boxes. DVI source are
supported with the use of an HDMI to DVI adapter.
13
USB 3.0 Host 1~2 Ports (Type-B): Connect directly to a standard USB
hosts such as a PC or laptop to extend their USB functionality to all
currently connected USB devices.
14
USB 3.0 Device Ports (Type-A): Connect directly to standard USB
devices such as a mouse, keyboard or flash drive to extend their USB
functionality to the host connected to the USB 3.0 Host Port.
15
HDMI OUT A Port: Connect to HDMI TV, monitor, or amplifier for
digital video and audio output.
16
CAT5e/6/7 OUT Port: Connect to a compatible HDBaseT receiver with
a single Cat.5e/6/7 cable for transmission of all data signals. PoH will
also be supplied to a connected compatible PD receiver.
17
RS-232 CONSOLE 3-pin Terminal Block: Connect directly to a PC,
laptop, or other serial control device with a 3-pin adapter cable to
send RS-232 commands to control the unit.
18
RS-232 1 3-pin Terminal Block (Left): Connect to a PC, laptop, or
serial controllable device with a 3-pin adapter cable for the extension
Bekijk gratis de handleiding van CYP EL-8400VA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | EL-8400VA |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8224 MB |
