CYP EL-8400VA handleiding
Handleiding
Je bekijkt pagina 11 van 112
6
6.2 Rear Panel
48V
12 L+ L- GGGR+R-L+L-GGR+R-L+L-
L+ L- R+ R-
GGR+R-
3.3V
IN G
OUT
MIC
AUDIO IN
LINE
12
RELAYIR
5V
OFF
48V
OFF
CAT 5e/6/7 USB-C DP HDMI HDMI HDMI
213456
HDMI ACAT5e/6/7 BCONSOLE BYPASS LAN12
USB
TXRX TXRX TX RX
100-240V ~ 2.0A 50/60 Hz
RS-232
OUT
AUDIO OUT
IN
TRIGGER
IN
24V
G
1
5
2
6
4
8
3
7
1 4 52 6 7 83
9 10 11 12 13 14 15 16 17 18 19 20
1
MIC IN 1~2 Ports & 48V/5V/OFF Switches: Connect to standard
microphones using a 5-pin terminal block adapter cable. Set the
switches based on the phantom power requirements of the connected
microphones.
Note: If no phantom power is required, this switch should remain in
the“Off” position to avoid potential damage to connected equipment.
2
AUDIO IN 5-pin Terminal Block: Connect to the analog stereo output
of a device such as an audio player or PC.
3
LINE IN Port: Connect to the analog stereo output of a device such as
an audio player or PC.
4
AUDIO OUT 5-pin Terminal Blocks: Connect to powered speakers or
an amplifiers for analog stereo audio output.
5
AUDIO OUT L/R 2-pin Terminal Blocks: Connect to unpowered
4Ω speakers for analog stereo audio output. Up to 20W of power is
provided to each speaker.
6
IR IN Port 2-pin Terminal Block (Left): Connect to an IR Extender to
receive local IR control signals and extend them to devices connected
to the other end of the HDBaseT connection. Ensure that the remote
being used is within direct line-of sight of the IR Extender.
IR OUT Port 2-pin Terminal Block (Right): Connect to an IR Blaster to
transmit IR signals from the other end of the HDBaseT connection to
devices within direct line-of sight of the IR Blaster.
Note: IR signals can only be routed across a single HDBaseT connection at
a time. The HDBaseT connection to use is defined within the WebGUI or
OSD menu.
7
RELAY 1~2 2-pin Terminal Blocks: Connect to devices that can be
powered and controlled via a DC 0~24V/5A relay connection such as a
curtain, projection screen, or lights.
Bekijk gratis de handleiding van CYP EL-8400VA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | EL-8400VA |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8224 MB |
