CYP EL-42PIP handleiding
Handleiding
Je bekijkt pagina 29 van 48
29
!
Note: Both outputs will always use the same resolution, regardless of
windowing mode. Certain functions and windowing modes are not
available when the output resolution is set to 4K@50/60Hz.
(3) Window Border
This section provides controls to add a coloured border to each window.
Click the dropdown next to the window you wish to aect and select a
border colour, or “OFF”. Selecting “OFF” will disable the border completely.
!
Note: The Window Border function is not supported when the output
resolution is set to 4K@50/60Hz.
(4) OSD Information
This section provides control over the OSD Information display for each
window. When the OSD switch is set to “ON”, each window will display
2 lines of input information including the input’s name and detected
resolution.
The position of the OSD Information is controlled by changing the “OSD
Location” setting which provides 6 possible location presets: Up Left,
Middle Left, Down Left, Up Right, Middle Right, Down Right.
!
Note: The OSD Information display is automatically disabled if the Logo
function is enabled.
(5) Logo Information
This section provides a way to upload a graphic logo to the unit and
display it on both outputs at a specified position. When the Logo switch
is set to “ON” the currently loaded logo will display on both outputs. If no
logo has been uploaded yet, a “No Image” error will be displayed.
To position the logo, type the X and Y coordinates into the spaces
provided and click on the “Save” button. The X and Y coordinates
correspond to the position of the upper left corner of the logo and cannot
exceed the horizontal (X) or vertical (Y) size of the currently selected
output resolution.
To upload a graphic logo, please click the “Choose File” button to open
the file selection window and then select the graphic logo file (8-bit
*.bmp format, 1920×1080 max resolution) located on your local PC. After
selecting the file, click the “Load...” button to upload the logo to the unit.
!
Note: The Logo function is not supported when the output resolution is
Bekijk gratis de handleiding van CYP EL-42PIP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | EL-42PIP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3608 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 3500 g |
| Breedte | 438 mm |
| Diepte | 269 mm |
| Hoogte | 49 mm |
