CYP EL-42PIP handleiding
Handleiding
Je bekijkt pagina 21 van 48
21
6.6.5 OSD Commands
COMMAND
DESCRIPTION VARIABLES
GET OUT A INFO LOGO HPOSITION
Show the graphic logo’s current
horizontal position.
SET OUT A INFO LOGO VPOSITION N1
Set the vertical position of the top left
corner of the graphic logo (in pixels).
N1 = 0~? [Vertical position]
!
Note: The maximum value depends on, and cannot exceed, the current output
resolution’s height minus 1.
GET OUT A INFO LOGO VPOSITION
Show the graphic logo’s current vertical
position.
6.6.6 Audio Commands
COMMAND
DESCRIPTION VARIABLES
SET AUDIO OUT A MUTE N1
Enable or disable muting the audio
output.
Available values for N1:
OFF [Un-muted]
ON [Muted]
GET AUDIO OUT A MUTE
Show the current audio mute state.
SET AUDIO OUT A ROUTE N1
Set Input N1 as the audio source to
output.
N1 = 1~4 [Input number]
GET AUDIO OUT A ROUTE
Show the current audio source.
SET AUDIO OUT A VOLUME N1
Set or adjust the analogue audio
output volume.
Available values for N1:
0~100 [Set volume in dB units]
UP [Raise volume by 1]
DOWN [Lower volume by 1]
Bekijk gratis de handleiding van CYP EL-42PIP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | EL-42PIP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3608 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 3500 g |
| Breedte | 438 mm |
| Diepte | 269 mm |
| Hoogte | 49 mm |
