CYP CR-UDC1 handleiding
Handleiding
Je bekijkt pagina 9 van 68
4
6
USB Port: Connect a USB mouse and keyboard to control the unit’s
WebGUI displayed on the HDMI output port.
Note: Specialised USB control devices, such as a touch panel, should be
connected before the unit is powered on.
7
LAN 2 Port: Connect directly, or through a network switch, to your
PC/ laptop to control the unit via WebGUI/Telnet.
Note: Both LAN 1 & LAN 2 can be used to control this unit, however only
LAN 1 supports the remote device discovery and control functionality.
8
LAN 1(POE) Port: This port is used to connect to the network devices
to be controlled. Connect to the controlled device’s private network,
either directly or through their dedicated network switch, to enable
detection and control over those units.
Note: If the connected network switch supports the IEEE 802.3af-2003
PoE (Power over Ethernet) standard, this unit can optionally be powered
directly via this Ethernet port.
9
DC 5V Port: Plug the 5V DC power adapter into the unit and connect
it to an AC wall outlet for power.
Note: Optional, not required if the unit is powered via PoE.
Bekijk gratis de handleiding van CYP CR-UDC1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | CR-UDC1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6150 MB |
