CYP CR-UDC1 handleiding
Handleiding
Je bekijkt pagina 8 van 68
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER IR
Device Controller
CR-UDC1
1 2
1
POWER LED: This LED will illuminate to indicate the unit is on and
receiving power.
2
IR Window: This functionality is reserved.
6.2 Rear Panel
LAN 1(POE) LAN 2USBHDMI OUTRS-232CONTROLIR EXT
DC 5V
TRIGGER IN
TX RX
1 2 3 4 5 6 7 8 9
1
IR EXT Port: This functionality is reserved.
2
CONTROL 5-pin Terminal Block: Connect to a PC, laptop or other
serial control device with a 5-pin adapter cable to control another
device via RS-232/422/485.
3
RS-232 3-pin Terminal Block: Connect to a PC, laptop or other serial
control device with a 3-pin adapter cable to control the unit via RS-
232.
4
TRIGGER IN 10-pin Terminal Block: Connect to the Trigger Control
Keypad (Optional) or any device with trigger switch functionality such
as window security alarms, motion detectors, door switches, etc. Each
of the 8 trigger inputs will activate the associated automation task
when triggered.
Note: A minimum of 5V DC is required to activate each trigger.
5
HDMI OUT Port: Connect to a standard HDMI display to view the
unit’s current status information and access the WebGUI directly
without a PC.
Note: HDMI output is locked to a resolution of 1080p@60Hz.
Bekijk gratis de handleiding van CYP CR-UDC1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | CR-UDC1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6150 MB |
