CYP CR-CS4 handleiding
Handleiding
Je bekijkt pagina 30 van 36
25
COMMAND
Description and Parameters
get uart N1 stop bit
Show the current number of stop bits of the specied serial port.
Available values for N1:
1 [Serial port 1]
2 [Serial port 2]
set relay N1 N2
Open or close the specied relay port’s circuit.
N1 = 1~4 [Relay port]
Available values for N2:
CLOSE [Close the relay]
OPEN [Open the relay]
TOGGLE [Toggle the relay’s state]
get relay N1
Show the current state of the specied relay port.
N1 = 1~4 [Relay port]
set trigger in N1 state N2
Enable or disable the specied trigger input. When disabled, the
associated macro will not be executed.
N1 = 1~16 [Trigger input]
Available values for N2:
ACTIVE [Enable the specied trigger]
INACTIVE [Disable the specied trigger]
Note: This setting aects the behavior of both the Trigger In and Trigger
Button ports.
get trigger in N1 state
Show the current state of the specied trigger input.
N1 = 1~16 [Trigger input]
Bekijk gratis de handleiding van CYP CR-CS4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | CR-CS4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3052 MB |
