CYP CR-CS4 handleiding
Handleiding
Je bekijkt pagina 22 van 36
17
Macro/Extension Macro: Click on this button to open a window
displaying all currently dened macros. Select the macro to be
executed by the currently selected event schedule.
6.6.6 Network Settings Tab
This tab provides controls to change the network settings for the unit. You
can manually set the IP address, netmask and gateway address in “Static
IP” mode, or you can obtain an IP address automatically by enabling
DHCP.
1) Network Settings: IP mode may be switched between Static IP
or DHCP. In Static IP mode the IP, netmask and gateway addresses
may be manually set. When in DHCP mode, the unit will attempt to
connect to a local DHCP server and obtain IP, netmask and gateway
addresses automatically. Please press “Save” after making any changes
to the IP conguration or mode. To return all network settings to their
defaults, press the “Network Reset” button.
Note: If the IP address is changed then the IP address required for WebGUI/
Telnet access will also change accordingly.
Bekijk gratis de handleiding van CYP CR-CS4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | CR-CS4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3052 MB |
