CYP CR-CS2 handleiding
Handleiding
Je bekijkt pagina 17 van 28
17
Click on the icon to edit each button’s macro.
Click on the mark to edit the command settings. Up/down arrows
are to move the command up or down and button is to delete the
command.
Click on Insert button/Add to insert commands. Command can be set
to control the Control System/SysCMD, other devices connected within
the same Telnet system/Internet area, RS-232 COM ports, IR and Relay
devices connected through the Relay outputs of Control System with
delay time. It is suggested the delay time is >100ms once the setting is
conmed, double click on Save Change.
Command set to control the devices within the same telent system
or internet area require to set its IP and Port number and it is strongly
recommand to set the delay time >500ms in order to secure a successful
command sending. Command set to control the Relay devices require to
set the Port number. Click on Save Change to conrm the setting.
Bekijk gratis de handleiding van CYP CR-CS2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | CR-CS2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2034 MB |
