CYP CR-CS2 handleiding
Handleiding
Je bekijkt pagina 16 van 28
16
6.7 WebGUI Control
Open a web browser on a PC/Laptop that is connected to an active
network and type the device’s IP address into the web address entry bar.
The login screen will appear and ask for a Username and Password. The
default username and password is “admin”. Please enter the information
and then click “Submit” to log in.
On the left side of the browser you will see the following menu tabs:
Extension Macro Settings, Extension Macro, Command Settings, Network
Settings, and System Settings.
6.7.1 Macro Settings
Click on the “Macro Settings” tab to execute/edit the settings for the
physical macro buttons. These macros can be executed by activating the
8 input triggers on the back of the unit as well as via the WebGUI or telnet.
There are 5 macros dened by default for testing the unit’s functionality.
Click on macros 1~5 to demonstrate various testing functions:
Macro 1: Sequentially close relays 1 through 8 with a 100ms delay
Macro 2: Sequentially open relays 1 through 8 with a 100ms delay
Macro 3: Sequentially toggle the state of relays 1 through 8 with a
100ms delay
Macro 4: Sequentially send IR signals from emitters 1 through 8 with a
100ms delay. The IR LED will ash on the front panel.
Macro 5: Send the command "Hello World" over COM ports 1 and 2
with a 100ms delay between commands.
Macros 1~8 align with Trigger IN 1~8. When a trigger signal is activated
the unit will execute the associated macro command.
Bekijk gratis de handleiding van CYP CR-CS2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | CR-CS2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2034 MB |
