CYP AVX-501F-TR handleiding
Handleiding
Je bekijkt pagina 10 van 32

5
6.2 Rear Panel
USB/SERVICELANRS-232IN
IRHDMI
OUTINOUTSFP+DP ININOUT
DC 12V
AUDIO
TX RX
1
2 3 4 5 6
7 8
9
10
1
HDMI OUT Port: Connect to an HDMI TV, monitor, or amplier for
digital video and audio output.
2
HDMI IN Port: Connect to HDMI source equipment such as a media
player, game console, or set-top box.
3
DP IN Port: Connect to DisplayPort source equipment such as a PC or
laptop.
4
SFP+ Port: Insert a standard SFP+ module, and connect the
appropriate optical cable to allow data transmission to a compatible
transceiver.
Note: The SFP+ module must support a dual-optical ber connection
style, such as LC, or be pre-terminated dual-optical ber cables.
Single-mode and multi-mode support is dependent on the SFP+ modules
used.
5
AUDIO PORTS:
OUT Port: Connect to powered speakers or an amplier for stereo
analogue audio output.
IN Port: Connect to the stereo analogue output of a device such as a
CD player or PC.
Note: Audio is routed directly from the IN Port to the opposite transceiver’s
OUT Port.
6
IR PORTS:
OUT Port: Connect to an IR Blaster to broadcast IR signals from a
connected transceiver to devices within direct line-of sight of the IR
Blaster.
IN Port: Connect to an IR Extender to receive IR control signals and
extend them to devices connected to a connected transceiver. Ensure
that the remote being used is within direct line-of-sight of the IR
Extender.
Note: Currently, only 38KHz IR signal extension is supported.
7
RS-232 Terminal Block: Connect directly to a PC, laptop or serial
controllable device with a 3-pin adapter cable to extend the RS-232
signal between transceivers.
Bekijk gratis de handleiding van CYP AVX-501F-TR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | CYP |
Model | AVX-501F-TR |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 2162 MB |