Handleiding
Je bekijkt pagina 14 van 32
WALL MOUNT INSTALLATION
INSTALLING REMOVING THE BASE STAND
WARNING
/
: The
LCD Display is very fragile and must be pro tected a t all times when removing t he base
Stand
Be sure that no hard or sharp object or anything that could scratch or damage the LCD display comes into
contact with it Do NOT exer t pressure on the front of the unit at any time because the screen could crack
1Disconnect all cables or cords connected to the unit
2Lay the unit down on a flat surf ace with the ba c k side facing up Please make sure to place a soft
cushioned material such as a pillow or thick piece of foam beneath the screen
3To rem ov e the bas e stand loosen screws of f the holes then pull downwards to re l ea s e
the ba s e stand
4To install the bas e stand put the stand into the hole at the bottom of the TV then insert screws to the
holes and tighten.
,
.
. .
..
. .
.,
.
.,
MOUNTING ON THE WALL
NOTE
Re m o ve the base stand before mounting the unit on the wall.
This unit is VESA-compliant, and is designed to be wall-mounted with a VESA-compliant 24”x 16 ”
(600mm x 400mm) mounting kit designed for flat-pa ne l TVs (not supplied). Mount this unit according to
the instructions included in the mounting kit.
Length of screw should not exceed 14 mm.
24”
16”
M5
(Not supplied)
11
Bekijk gratis de handleiding van Curtis LCD4686A-W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Curtis |
| Model | LCD4686A-W |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 6013 MB |
