Curtis enGage VI handleiding
Handleiding
Je bekijkt pagina 11 van 24
11Curtis Instruments enGage
®
VI Manual
Table 9 Module Product, Model 3601P J4 Pushbutton Connector
Pin No. Signal Description
1 Common
2 Pushbutton 1 (Left)
3 Pushbutton 2 (Up)
4 Pushbutton 3 (Select)
5 Pushbutton 4 (Down)
6 Pushbutton 5 (Right)
Mating Connectors Module Product, Model 3601P
See Table 10 below for AMP Mini Universal MATE-N-LOK series mating connectors for J1 through J3.
AMP connector pin part number is 770904-1 (Curtis p/n 12690FC36) for use with 18-22 AWG wire.
Table 10 Mating Connector for Module Units, Model 3601P
Optional Mating Harness Assemblies (connectors with ying leads and butt splices)
• Connector J1: 15233011
• Connector J2: 15233013
• Connector J3: 17633308-03
Video Input Option
The optional video input accepts signals from two video sources. It can accept signals in NTSC or PAL
format. The video can be displayed in normal or mirrored mode. The unit can be programmed to place
the video from either source on the screen when activated. The
pushbutton switches the display to
video input 1. The
pushbutton switches the display to video input 2, if two video inputs are enabled.
The
pushbutton returns to the main display. The signal to switch to each video display can also be
based on one of the switch inputs or on CANbus data. The video image is shown with full resolution
and no scaling or zooming.
Connector
Mating Connector
1
AMP p/n Curtis p/n
J1 770581-1 12690FH81
J2 770585-1 12690FH138
J3 770583-1 12690FH154
1
Housing p/n only, see above for AMP connector pin part number.
Bekijk gratis de handleiding van Curtis enGage VI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Curtis |
| Model | enGage VI |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2124 MB |
