Curtis Electronic Code Switch handleiding

Niet gecategoriseerd

Curtis

73 pagina's

PDF beschikbaar

Handleiding

6 — PROGRAMMABLE PARAMETERS

Curtis Electronic Code Switch Module (ECS) – June 2022 Return to TOC

pg. 20

SUPERVISOR MANAGEMENT MENU

e Supervisor Management menu allows the supervisor to add and delete authorized users. is

menu is visible when the supervisor has logged on to manage users.

Note: e First Free User ID parameter cannot be accessed through the CANbus. Data for the other

parameters can be downloaded and uploaded only when the supervisor is logged on to manage users.

Adding a user involves creating an RFID tag and/or a PIN code for a user ID. When a PIN code or

an RFID tag is added or a user is deleted, the buzzer sounds the Success sound. For steps on using

this menu, see Use the Supervisor Management Menu.

e following table describes the Supervisor Management parameters.

SUPERVISOR MANAGEMENT MENU

PARAMETER

CAN INDEX

VALUES

RAW VALUES

DATA SIZE

READ/WRITE ACCESS LEVEL DESCRIPTION

First Free User ID 0–99

0–99

8-bit

Field Basic Indicates the rst user ID for which neither a PIN Code

nor a user tag has been added.

Target User ID

0x3830:00

1–99

8-bit

Field Basic Species the user ID to be managed.

Target User State

0x3831:00

1–5

8-bit

Field Basic Indicates the user status of the Target User ID.

1 = The user is not authorized to access the ECS.

2 = The user only has a PIN Code.

3 = The user only has an RFID tag.

4 = The user has both a PIN Code and an RFID tag.

5 = An error has occurred.

Create Target User

PIN Code

0x3833:00

Off/On

0–1

8-bit

Field Basic Activates the PIN code for the Target User ID. To

activate, set the parameter to On.

The default PIN code is 1234. It’s recommended that

the user change the PIN code.

If the supervisor attempts to create a new PIN code

for a Target User ID that already has a PIN code, the

buzzer will sound the Error sound. To create a new

PIN code, delete the user, then create a PIN code for

the same user ID.

Create Target User

RFID Tag

0x3832:00

Off/On

0–1

8-bit

Field Basic Activates the RFID tag for the Target User ID. To

activate, set the parameter to On, then place the

tag in front of the ECS until the buzzer sounds the

Success sound.

If the supervisor attempts to create a new tag for a

Target User ID that already has a tag, the buzzer will

sound the Error sound. To create a new tag, delete

the user, then create a tag for the same user ID.

Delete Target User

0x3834:00

Off/On

0–1

8-bit

Field Basic Deletes the Target User ID. To delete, set the

parameter to On.

Bekijk gratis de handleiding van Curtis Electronic Code Switch, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.