Curtis Electronic Code Switch handleiding
Handleiding
Je bekijkt pagina 19 van 73
4 — INSTALLATION AND WIRING
pg. 13
Return to TOC Curtis Electronic Code Switch Module (ECS) – June 2022
RELAY OUTPUT
e ECS uses a normally open (NO) relay as an output driver. When the relay engages, Relay NO
(pin 4) outputs the power provided by the power source. Connect Relay COM (pin 3) in series with
the power source, and connect Relay NO to the load.
e following table describes the Relay COM operating voltage:
Nominal Minimum Maximum
12–96V 8.4V 120V
e following table and Figure 3 describe the maximum switching current for various voltages when
a resistive load is connected:
Contact Voltage Maximum Switching Current
12V 16.0A
24V 16.0A
36V 1.5A
48V 0.9A
60V 0.7A
72V 0.6A
80V 0.5A
96V 0.3A
120V 0.3A
Figure 3
Relay Contacts — Maximum
Switching Current
Contact Current (A)
200
1005040302010
Contact Voltage (V)
Bekijk gratis de handleiding van Curtis Electronic Code Switch, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Curtis |
| Model | Electronic Code Switch |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8988 MB |
