Curtis 1356P handleiding
Handleiding
Je bekijkt pagina 29 van 58
Curtis 1356/1356P CAN Expansion Module Manual, Rev. A
25
USING AN SDO TO MAP A PDO
e following SDO format shows how to map an SDO to a PDO.
Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6 Byte 7 Byte 8
Request LSB MSB Sub- LSB Index MSB Index Sub-index Length
WR Index Index Index of Object of Object of Object
Byte 1 contains the request “Write” action, as described earlier.
Bytes 2 through 4 describe the PDO and the byte within the PDO that
is to be mapped. Bytes 2 and 3 hold the index indicating the PDO and Byte
4 holds the sub-index (range 1–8) indicating the PDO byte to be mapped.
Bytes 5 through 8 describe the object to be mapped; in other words; they
dene the object that has the data that will be transmitted. e object index
comes rst (least signicant byte rst), followed by the sub-index, followed by
the number of bits to be transferred (must be 8). Note that the sub-index here
is used to specify a particular byte within a multi-byte object.
For example, take a 32-bit object. To access the least signicant byte of
a long word (32 bits), the sub-index should be set to 0. To access the most
signicant byte of a long word (32 bits), the sub-index should be set to 3.
e SDO commands below show an example of mapping the encoder
pulse counts (32 bit, index=0x3190) to PDO1-MISO bytes 1–4.
Map the LSB byte to PDO1-MISO Byte 1
Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6 Byte 7 Byte 8
0x22 0x00 0x1A 0x01 0x90 0x31 0x00 0x08
Map the second byte to PDO1-MISO Byte 2
Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6 Byte 7 Byte 8
0x22 0x00 0x1A 0x02 0x90 0x31 0x01 0x08
Map the third byte to PDO1-MISO Byte 3
Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6 Byte 7 Byte 8
0x22 0x00 0x1A 0x03 0x90 0x31 0x02 0x08
Map the MSB byte to PDO1-MISO Byte 4
Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6 Byte 7 Byte 8
0x22 0x00 0x1A 0x04 0x90 0x31 0x03 0x08
In these SDO commands, bytes 2 and 3 hold the index of PDO1_MISO
mapping (0x1A00) and the sub-index in byte 4 shows the byte to be mapped.
Bytes 5 and 6 hold the object index (0x3190) and the sub-index in byte 7 shows
the byte in the 32-bit object to be mapped.
5 — SDO: Communication Profile Objects
Bekijk gratis de handleiding van Curtis 1356P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Curtis |
| Model | 1356P |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7745 MB |
