Curtis 1356P handleiding
Handleiding
Je bekijkt pagina 28 van 58
24
Curtis 1356/1356P CAN Expansion Module Manual, Rev. A
case of a 32-bit transfer follows the same strategy, with the least signicant byte
placed in data byte 5 and the most signicant byte placed in data byte 8.
SDO 1356 /1356P Response (SDO-MISO)
An SDO request is always acknowledged with a response message from the
1356 /1356P. e 1356 /1356P can issue two kinds of response messages: a
normal response or, in case of an error in the request SDO, an Abort SDO
Transfer message.
SDO-MISO
(sent by 1356 /1356P in response to the system master)
Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6 Byte 7 Byte 8
Control CAN Object Sub-index Data: either the requested Read values,
Index or the actual Write values, or an error code
e rst byte of the response contains an acknowledge code, which de-
pends on the type of transfer that was initially requested.
Action
Byte 1
Value
Read Response 0x40
Write Acknowledge 0x60
Abort SDO 0x80
Data bytes 2, 3, and 4 hold the CAN Object index and sub-index of the
request SDO.
If the SDO is a read command, bytes 5 through 8 will be lled with the
requested values, with the LSB in byte 5 and the next least signicant in byte6
and so forth. All unused bytes are set to 0.
If the SDO is a write command, bytes 5 through 8 will return the actual
value written in bytes 5
– 8. In this way, if the 1356 /1356P needs to limit or
round-down the SDO write request, the master will know—because the return
value will be dierent than the sent value.
If the SDO-MOSI did not properly read or tried to access a parameter
improperly, an Abort SDO Transfer will be sent. Bytes 5 through 8 will be
lled with a 32-bit error code.
0x06020000 = Object does not exist
0x06010002 = Attempt to write to a read only object
0x06040041 = Object cannot be mapped.
5 — SDO COMMUNICATIONS
Bekijk gratis de handleiding van Curtis 1356P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Curtis |
| Model | 1356P |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7745 MB |
