Curtis 1352 handleiding
Handleiding
Je bekijkt pagina 8 van 40
2 — INSTALLATION AND WIRING
Curtis 1352 eXm Manual, June 2021
Return to TOC
pg. 4
2 — INSTALLATION AND WIRING
MOUNTING THE MODULE
e outline and mounting hole dimensions for the 1352 eXm module are shown in Figure 2. e
module should be mounted using two M6 or #12 or 1/4" screws.
Care should be taken to prevent contaminating the connector area before the mating 14-pin
connector is installed. Once the system is plugged together, the eXm meets the IP65 requirements
for environmental protection against dust and water. Nevertheless, in order to prevent external
corrosion and leakage paths from developing, the mounting location should be carefully chosen to
keep the module as clean and dry as possible.
CAUTION
Figure 2
Mounting
dimensions,
Curtis 1352 eXm
module.
65 (2.6)
130 (5.2)
Status
LEDs
100
(3.9)
87
(3.4)
6.5 (0.25) dia.,
2 plcs
39
(1.5)
Dimensions in millimeters (and inches)
If the outputs will be used at or near their maximum ratings, it is recommended that the module be
mounted to a good heatsinking surface, such as an aluminum plate.
Bekijk gratis de handleiding van Curtis 1352, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Curtis |
| Model | 1352 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5176 MB |
