Curtis 1352 handleiding
Handleiding
Je bekijkt pagina 27 van 40
5 — SDO COMMUNICATIONS
pg. 23
Return to TOC Curtis 1352 eXm Manual, June 2021
TABLE 2 PARAMETER DEFINITIONS
Manufacturer’s Status Register, Store Parameters, and Restore Parameters require further explanation.
Manufacturer’s Status Register
e Manufacturer’s Status Register reects the present fault ags. Each fault has its own bit in the
Status Register. Unlike the LED Status of the Emergency Message, which can only relay the highest
priority fault, the 32-bit Status Register shows all present faults.
Fault Bit Location Description*
Internal_Fault LSB: Bit 0 Internal hardware or Software fault
EEPROM_Fault Bit 1 EEPROM did not write, or checksum failure
Over_Voltage Bit 2 Supply is over the set voltage limit
Under_Voltage Bit 3 Supply is under the set voltage limit
Over_Temperature Bit 4 Temperature is over the 95°C limit
Under_Temperature Bit 5 Temperature is under the –50°C limit
Driver_Current_Limit Bits 6 – 11 Driver 1 – 6 is over the current limit
Driver_Open_Detect Bits 12 – 17 Driver 1 – 6 output pin is disconnected
PDO_Timeout Bit 18 Too much time between PDOs
SDO_Fault Bit 19 SDO was aborted
CAN_Bus Bit 20 CAN Bus error frame faults
Bits 21 – 31 Reserved (presently unused)
* See Section 6: Diagnostics and Troubleshooting for more detailed descriptions and probable causes of these faults.
Bekijk gratis de handleiding van Curtis 1352, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Curtis |
| Model | 1352 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5176 MB |
