Curtis 1253 handleiding
Handleiding
Je bekijkt pagina 9 van 49
Blue Ox Review of wiring diagrams [24 July 2007]
Curtis 1253 Manual, Rev. F
3
Blue Ox Rev. A, draft #1 [3 August 2007]
INSTALLATION AND WIRING
MOUNTING THE CONTROLLER
e 1253 controller can be oriented in any position, and meets the IP54 ratings
for environmental protection against dust and water. However, the location
should be carefully chosen to keep the controller clean and dry. If a clean,
dry mounting location cannot be found, a cover must be used to shield the
controller from water and contaminants.
e controller’s outline and mounting hole dimensions are shown in
Figure 2. When selecting the mounting position, be sure to also take into
consideration that access is needed at the end of the controller to plug the
programmer into its connector.
To ensure full rated power, the controller should be fastened to a clean,
at metal surface with four 6 mm (1/4") diameter screws, using the holes
2
2 — INSTALLATION & WIRING: Controller
Fig. 2 Mounting dimensions, Curtis 1253 controller.
7.2 (0.28) dia.
16 (0.63)
196 (7.72)
31.3 (1.23)
133.3 (5.25)
146.0 (5.75)
130.3 (5.12)
8.5 (0.33) dia.
25 ×19 × 3
(1.0 × 0.75 × 0.12
)
5.0
(0.20)
77 (3.03)
Dimensions in millimeters and (inches)
Bekijk gratis de handleiding van Curtis 1253, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Curtis |
| Model | 1253 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6360 MB |
