Curtis 1229 handleiding
Handleiding
Je bekijkt pagina 37 van 143
3 — I/O MAPPING
pg. 31
Return to TOC 1229 Manual - OS 1.8 RevA - May 2021
Example 3: Using logic gates and vehicle status functions
is example uses a switch input for dynamically adjusting the Speed Mode, by use of the Logic
functions. e Speed Mode selection is Switch 2 as illustrated in Figure 9. Here the I/O mapping
employs the Logic Gate function to force the vehicle to use Speed Mode 1 when the BDI is below 20%.
2-Switch 2
On Delay = 0.1 s
Off Delay = 0.1 s
Normally Closed = Off
16-Threshold 3
Input = 107 (BDI)
On Threshold = 20%
Off Threshold = 19%
107-BDI
41-Logic Gate 1
AND/OR/XOR = 1 (AND)
Input 1 = 3 (Switch 3)
Input 2 = 16 (Threshold 3)
Input 1- = Off
Input 2- = Off
Output- = Off
94-Speed Mode
Input = 41 (Logic Gate 1)
Signal #2
Signal #16
Signal #107
Signal #41
e reshold 3 function is set to detect the 20% BDI threshold on signal #107 (BDI). As congured,
reshold 3 will generate a signal that is On (100%) when its input (BDI) is above 20% and O (0%
when its output is below 20%).
41-Logic Gate 1 is then used to “and” this signal with Switch 3. e resulting signal on Logic Gate
1 will reect the state of Switch 3 when BDI is above 20%, and will be forced to O when BDI is
below 20%.
Setting 94-Speed Mode to 41 completes the mapping.
Bekijk gratis de handleiding van Curtis 1229, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Curtis |
| Model | 1229 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 19864 MB |
